REPLACING THE MOTOR ON THE SINGER 221 FEATHERWEIGHT SEWING MACHINE
REMOVE THE OLD MOTOR BY REMOVING THE SCREW AND WASHER FROM THE MOTOR MOUNT.
TURN MACHINE OVER AND REMOVE THE BOTTOM COVER THEN REMOVE THE 3 PRONG POWER BLOCK BY REMOVING THE SCREW (1). REMOVE THE MOTOR WIRE FROM THE #1 RED POST (LEFT POST)#2 BLACK POST (CENTER), TAKE THE WIRE CLAMP OFF THAT IS CONNECTED TO THE MACHINE.
MOUNT NEW MOTOR FEED WIRE THROUGH HOLE NEAR MOTOR MOUNT AREA AND RECONNECT WIRE CLAMP AND ATTACH MOTOR WIRES BACK TO 3 PRONG PLUG THE #1 RED POST (LEFT POST) AND #2 BLACK POST (CENTER). PUT BOTTOM COVER BACK ON.
CONNECT THE MOTOR TO THE MACHINE WITH THE WASHER/SCREWPUT ON BELT AND ADJUST THE BELT SO NOT TO TIGHT BUT DOES NOT SLIP TIGHTEN THE MOTOR MOUNT SCREW.
RUN THE MACHINE AND CHECK THAT THE BELT IS NOT TO TIGHTMOTOR SHOULD TURN FAST, IF SLUGGISH LOOSEN SCREW ANDADJUST MOTOR A LITTLE LOSER AND RE-TIGHTEN MOTOR MOUNT SCREW.
IF YOU HAVE QUESTION PLEASE EMAIL ME AT duanesechser@hotmail.com and I will be happy to help.
thank you,
duane
I also buy sewing machines and take donations so if you have a few that you would like to pass on I will be happy to take them off your hands.
HAVE A SEWING MACHINE AND THE MOTOR NEEDS SOME WORK, WIRING IS BAD OR JUST RUNS SLUGGISH, I AM HERE TO HELP!
I HAVE BEEN REPAIRING SEWING MACHINES FOR AROUND 20+ YEARS SO GIVE ME A CALL OR DROP ME AN EMAIL AND WE CAN GET TOGETHER AND SEE IF YOUR MOTOR IS REPAIRABLE OR JUST NEEDS REPLACED.
I ALSO TAKE DONATIONS & WILL BUY MOTORS AND SEWING MACHINES AT WHOLE-SALE PRICES DO LETS TALK.
MY EMAIL IS- duanesechser@hotmail.com
MY PHONE IS-1-605-359-8939
I WILL BE HAPPY TO VISIT WITH YOU AND GET YOU SEWING, THANK YOU.
DUANE
